How Do Remote-Controlled Fans Work?

Ceiling fans are absolute essentials for an Indian household to maintain the air circulation in the room and help beat the scorching heat. There are various kinds of ceiling fans available in the market today, each varying in terms of size, design, functionality, and features.

Designer ceiling fans, such as remote-controlled fans, come with advanced features and functionalities to make your life comfortable and cater to your convenience. When you look to purchase a ceiling fan with a remote, you will find a diverse range of products at Crompton, all varying in size, design, and colour. Before we go into more detail about a Crompton remote fan, let’s understand the basics of remote-controlled fans

How Does a Remote-controlled Fan Work?

A ceiling fan remote control is designed to serve the convenience of the user. You can use your remote control to operate your ceiling fan without getting out of bed. Using a remote You can also manage the power, fan speed, direction of the fan rotation, and timing right from the comfort of your bed. Let us find the answer to the question, “How do remote-control ceiling fans work?”

Fans with receivers

Remote-controlled fans consist of a transmitter (which is the remote control) and a receiver (a component that is wired into a ceiling fan). In most cases, the receiver of a remote-controlled fan is wired to the power supply itself and concealed within the ceiling fan’s collar. So, when you press a button on your ceiling fan remote control, the receiver gets triggered to exert its preset power over the hot wire, which signals the ceiling fan what to do.

Different Wiring

Different kinds of wires collectively help in the working of a remote-controlled ceiling fan.

• Ground wires: The purpose of ground wires, also known as earth wires, is to provide a secure path for excess electricity to flow. These wires provide a low-impedance path for displaced energy to “ground,” efficiently neutralising the electrical current and significantly decreasing the likelihood of electrical injuries and accidents. Ground wires, which are typically green in colour, must all be linked to one another. It is important to note that the receiver is not connected to the ground wires, which are meant for carrying excess power away from the electrical supply line.

• Neutral wires: Neutral wires, which are typically white, complete the electrical circuit by connecting it to its source of power. The fan’s neutral wire, receiver wire, as well as the “house” neutral wire, are all connected. The “house” neutral wire is the one connected to your home’s wiring.

• Power Supply line: The supply line, or hot wire, which is commonly distinguished by a black wire, powers the fan’s receiver. After receiving a signal from the remote transmitter, the receiver allows the current supplied by the supply line to enter the fan and perform the intended function. It can also block the current to switch off the fan.

• Output wires: The fan’s wires are connected to the output wires that extend from the receiver. In general, the receiver has the same number of output wires as its functions. For example, if your remote control fan is just a fan, it will only have one output wire, whereas a remote fan with light will have two.

The transmitter and receiver are connected

Both the receiver and the transmitter are connected and communicate via a frequency. The ceiling fan remote control transmits a signal at a specific frequency, which the receiver picks up using its antenna. The receiver then decodes the signal and sends a corresponding signal to the ceiling fan by either allowing or preventing current from the electricity supply line from entering the specified output wire. Please keep in mind that for communication to occur, the transmitter and receiver must be set to the same frequency. 

Benefits of a Remote Control Fan

Here are a few benefits of a remote control fan which make it the ideal choice for those looking for convenience and comfort. 

1. Can control numerous fans at once

You can programme your remote-controlled fans so that their functionality is controlled by just one remote. This eliminates the need to remember multiple switches simply to turn them on or off or to adjust the speeds.

2. Easy accessibility

The most significant benefit of remote-controlled ceiling fans is their accessibility, as they enable you to turn on or off your ceiling fans or change their speeds without having to leave your place. Meaning, you will not have to move from your bed to change the speed. This is beneficial for someone with limited mobility, as it lets them control the fan settings without someone else’s assistance.

3. Different Timers and Moders

A ceiling fan remote control typically includes multiple speed settings as well as an on/off button for the light if you have a remote fan with a light. They may also include dimmers to use different light modes and a timer to turn on and off the fan after a certain amount of time.

4. Sleek Design

Remote-controlled fans come in sleek designs to match the elegance of your home interiors. With their aesthetic appeal, efficiency in working, and the convenience they provide, these fans have become must-have additions to luxury homes.

Finding Solutions to Remote-Controlled Fan Problems

If you’re not sure about how to use a remote fan, you might experience ceiling fan remote problems at some point. Here’s what you can do for troubleshooting remote control ceiling fan problems.

1. Inspect the remote range

You must ensure that the ceiling fan remote control is within range of the fan for it to receive the signal. Numerous fans have ranges of even more than 40 feet, but when testing one, you must bring the control within ten or twenty feet of the fan. 

2. Make sure the batteries are working

If the ceiling fan remote control only appears to work at short range, the remote’s batteries could be low on charge and must be replaced. Another way to identify the battery problem is by looking at the indicator light. If it does not come on, your remote is bound to have a battery problem. You can check the battery position, and if needed, you must replace them.

3. Reset the remote

To do so, turn off the ceiling fan and press and hold the power button on the remote till the light on it begins to flash. After that, for 30 seconds, press and hold it again to resynchronize the remote control with the ceiling fan. Another option is to remove the batteries from the remote. Then, for about 15 seconds, press and hold the power button on your remote. Place the batteries back and try using your ceiling fan remote again.

4. Inspect the frequency

To do so, first, remove the batteries from the remote control and then the back of the remote. A small panel that encloses the dip switches must be easy to find and remove. Slide the buttons with a pen or screwdriver to match the frequency of the ceiling fan receiver. Reassemble the remote and replace the batteries. Then, test the ceiling fan remote control to ensure that it works properly with the ceiling fan.

5. Replace the remote if it still does not work after troubleshooting

If the ceiling fan remote control still does not work after following these steps, it is time to have it replaced. If you can’t find a remote control for your ceiling fan’s brand, then invest in a universal ceiling fan remote.

Important Points to Keep in Mind While Choosing a Remote Control Fan

Remote-control ceiling fans are truly a luxury in disguise. However, when going to purchase one for your home, you must keep these points in mind.

• Pick an all-rounder: What’s the point of investing in a ceiling fan with a remote control if it only provides convenience and does not help you save money on your monthly electricity bill? Lucky for you, Crompton’s Energion HS High-Speed Ceiling Fan With Remote Control | Powerful 35-Watt Motor is made using the latest BLDC technology, which consumes 50% less energy in comparison to conventional fans. This fan will not only enhance your interiors and provide easy access through remote control but also help you save on your monthly electricity bill.

• Pick “simply the best”: Pick a remote-control fan that allows you to be quick and lazy at the same time. You can control all its settings from one place without having to physically move. Crompton remote-control fans come with point-anywhere smart remotes. These remotes work even when they are not pointed at the fan. They also come with a multi-pairing system to control multiple fans using the same device.

• Pick the one that lets you enjoy a good night’s sleep: Remote-controlled fans at Crompton come with a “sleep timer” feature that turns off the fan automatically after a set number of hours, so you don’t have to wake up in the middle of the night to turn off your fans.

• Don’t forget the looks: Of course, you picked a supremely efficient remote-control fan that even helps you save on energy consumption, but what if it doesn’t match your interiors? Gladly, Crompton fans are not just efficient but also appealing enough to blend well with your home interiors.

Crompton’s Superior Range of Fans with Remote Control

To add functionality and value to the aesthetic appeal of your room, you must invest in a Crompton ceiling fan with a remote. Crompton offers user-friendly remote control ceiling fans that come with some incredible features to serve your comfort and convenience. 

You can get yourself the SilentPro Enso Antidust Fan: Power Saving ActivBLDC Fan with Remote Control and Antidust feature. This noiseless fan offers high air delivery, has a high power factor of 0.98, comes with a wide voltage range of 90V–300V, and offers 50% energy savings—all at the best remote fan price. Its point anywhere remote is what steals the show. This remote has a multi-pairing system and timer functions, as well as an intelligent memory function that remembers the last fan speed setting when switched on.

Another example is the Trigger Glow Ceiling Fan with Colour Changing LED Lights: Antirust Fan with Remote Control. This fan has a rich electroplated finish with electrophoretic lacquer for anti-rusting and comes with an efficient ceiling fan remote control. You can use this remote control to change the ceiling fan speed, and the colour of the light (options include blue, white, yellow, red, and warm white), as well as switch the light on and off.

The remote control that comes with a Crompton remote fan is quite easy to use and will make your life easier by providing you with the world’s comfort and convenience in your home. To find the best one for you under Rs. 6,000, you can read our blog. Wait no more, bring home a Crompton remote fan now!

FAQs on Remote-Controlled Fans Working

How to control the fan using a remote?

Press the buttons on the ceiling fan remote control to change the speed settings, the direction of fan blade rotation, power, lighting, and timer.

How to reset the ceiling fan remote?

To reset the ceiling fan remote, turn off the fan and press and hold the power button on the remote till the light on it begins to flash. After that, for 30 seconds, press and hold it again to resynchronize the remote control with the ceiling fan. Another option is to remove the batteries from the remote. Then, for about 15 seconds, press and hold the power button on your remote. Place the batteries back and try using your ceiling fan remote again