5 Ceiling Fan Speed Problems: Why Doesn’t Your Fan Give The Best Air Flow ?

As you enjoy the brief respite that the winter winds have brought, it is time to prepare yourself for the scorching heat and the strong summer sun. The only thing that brings you relief on such days is sitting under a high speed ceiling fan.

Well, if your high-speed ceiling fan is not providing you with the airflow you desire in your room and if you feel there is something wrong with the speed of a ceiling fan in your room, we are here to help you find a solution to your problem. All your questions about your fan running slow and how to increase the speed of your ceiling fan will be answered here.

Reasons Why Ceiling Fans Run Slowly

Overtime, ceiling fan’s start working at a slower speed, reducing their effectiveness. To address these problems, you should first understand the reasons behind why your ceiling fan is running slow

Poor capacitor

The capacitor in a ceiling fan is in charge of providing the accurate power needed for the motor. A bad capacitor causes over 90% of ceiling fan problems. When the capacitor fails, power cannot be transferred to the motor. Besides that, this could also be why your ceiling fan is running slow compared to its usual speed.

Blades that cause wobbling

Oftentimes, your ceiling fan blades might get damaged contributing to an imbalance in the fan. It might also happen that the blades of an old fan begin making  . Replace any blades that have a bent area as soon as possible since they have the possibility of injuring anyone present in the room.

Old bearings

Ceiling fans commonly accumulate dirt particles, dust, as well as debris within the ball bearings over time. This frequently results in the ceiling fan’s slow speed and also makes it difficult for the bearing to move.

Loose screws

Loose screws are yet another factor that can cause your ceiling fan slow speed. This is extremely common in fans that have not been professionally fitted.

Lack of lubrication

The lubrication within a ceiling fan’s motor is critical for efficient working. The mechanical components inside the motor begin to dry out if they are not properly lubricated. It eventually either causes your high-speed ceiling fan to run slowly over time or causes it to stop working altogether.

How Fast Should a Ceiling Fan Spin?

The spinning speed of a ceiling fan depends on several factors, such as the size and the manufacturing of the appliance. Still, on average, the ceiling fan RPM is usually between 50 and 100, which is quite low. A 48-inch fan spins at a ceiling fan RPM speed of between 315 and 365, depending on the company you choose to buy the high-speed ceiling fan from.

Steps to Make Your Fan Move Faster

There are several steps you can take to increase ceiling fan speed. Here are a couple of tips for how to improve ceiling fan speed.

1. Clean and balance the fan blades

To clean the ceiling fan, slide one fan blade into the pillowcase and wipe the top and bottom of it. The pillowcase will catch any dust that might fall on the floor. Next, you must balance the fan blades. Once done, the speed of a ceiling fan in the room will come back to its normal speed.

2. Lubricate the fan

If your high-speed ceiling fan comes with oil ports, just open them and pour oil into them. If it does not have oil ports, take the fan down, remove the blades and lighting fixture, directly add oil to the bearings on two sides, and rotate the fan to and fro to let the oil get sucked into the bearings.

3. Replace the capacitor

The capacitor is usually located in the fan’s hub. To access the capacitor, remove the cover located at the bottom of the fan, just as you would when replacing a pull-chain switch. Remove the wires that are connected to it and install the new capacitor. After that, reattach everything.

4. Replace the speed controllers

Your controller might not be compatible with your high-speed ceiling fan. Fans with solid-state controls, for example, will only run at preset speeds such as low, medium, and high and cannot be controlled using a remote. The best thing you can do to improve your ceiling fan’s slow speed is to replace the speed controller with a compatible one.

The Takeaway

If you are looking for a high RPM ceiling fan for your home, just explore the incredible Crompton ceiling fans and bring home the goodness of soothing airflow. We hope this article helped you understand everything you must know about your ceiling fan’s slow speed. Stay tuned to Crompton to learn more about ceiling fans and how to keep them clean.

FAQs on Ceiling Fan Speed Problems

1. What is the right RPM of a high speed ceiling fan?

In general, a high-speed ceiling fan should have a minimum RPM of 350 to 400 to effectively circulate air in the room. However, some high-speed ceiling fans can have a maximum RPM of 600 or higher.

2. Why does the speed of a ceiling fan slow down?

The speed of a ceiling fan may slow down due to dust accumulation, motor problems, capacitor issues, wiring problems, or incorrect installation. Diagnosing and fixing the problem may require cleaning, repairs, or replacement of parts, depending on the specific cause of the issue.

3. Does the ceiling fan consume less electricity at a slower speed?

Yes, a ceiling fan consumes less electricity at a slower speed than at a higher speed. The power consumption of a ceiling fan is directly proportional to the speed at which it operates.

4. Can I replace the speed controllers on my ceiling fan?

Yes, in most cases, the speed controller on a ceiling fan can be replaced. However, it’s important to make sure that the replacement controller is compatible with the specific model and design of your ceiling fan. It’s recommended to consult the manufacturer’s instructions or seek professional help to ensure proper installation and safety.