How to Clean the Honeycomb Pads of an Air Cooler?
With the summer season approaching, considering a quick cooling solution for your home would be your best bet. Air coolers, for one, are a smart, efficient, and affordable solution to your cooling concerns at home. Cooling pads in an air cooler soak up water to cool the air that passes through them. This soothing, cool air is then circulated throughout the surroundings. If you are confused about which material—honeycomb pad vs. wood wool—to pick for your air cooler, read on.
What is a Honeycomb Cooling Pad?
An air cooler honeycomb pad resembles a honeybee hive. They are manufactured using well-designed cellulose materials and possess a high water retention capacity. The water-retention compartments in a honeycomb cooling pad quickly convert the hot air from outside into cool, soothing air.
How do Honeycomb Pads Improve Air Cooler Performance?
Everything about honeycomb pads in an air cooler is remarkable. A honeycomb pad in an air cooler can retain water just like a hive contains honey. This is due to the honeycomb cooling pad material and its design structure. When the hot air is drawn through the pads, it cools down even faster owing to the water retained in the cooling media chambers. This improves the air cooler’s performance and results in the circulation of cooling air into the surroundings.
What are the Benefits of Honeycomb Cooling Pads?
When brands use honeycomb pads for air cooler manufacturing, they offer air coolers intending to provide the following benefits:
- Better water retention
- Low maintenance
- Better evaporative cooling
- Cost-effectiveness in the long run
Honeycomb pad vs. Wood wool: What’s the Difference and Which is better?
Let’s now understand the basics of wood wool cooling pads to further understand the difference between the two.
Wood wool cooling pads, also known as aspen cooling pads, are composed of synthetic fibre and wood shavings. They have an appearance similar to that of dry grass. These pads have a relatively low capacity for water retention. These cooling pads contain small sprinters that absorb water and cool the air outside.
The following table will help you better understand the difference between a honeycomb pad and a wood wool pad:
|Point of Difference||Honeycomb||Wood Wool|
|Durability||2-3 years||<1 year|
|Material||Cellulose||Synthetic fibre and wood shaving|
This table explains how efficient honeycomb pads can be in comparison to wood wool pads. With better cooling efficiency, low maintenance costs, and incredible durability, honeycomb pads are truly amazing elements of an air cooler.
How to clean the honeycomb pads of an air cooler?
Honeycomb pads are without a doubt the best choice for an air cooler. However, you must know how to clean honeycomb pads for better maintenance of the air cooler. Clean them to make your air cooler more effective.
- Pick a day with appropriate climatic conditions: If the weather outside is cloudy or rainy, you must attempt to clean your swamp cooler pads.
- Taking off the cooling pads: You can do this by first removing the panel. Now, take out the front cover and then the top panel.
- Examine the condition of the pads: Once the pads have been removed, thoroughly check them. Are they slowly dissolving? They have accumulated a lot of salt water and must be replaced. After examination, the pads should be cautiously moved from the roof to the floor for cleaning.
- Cleaning the cooling pads: You must first take your pipe but then just lean the pads. The routes within each sheet will be demonstrated on the sides by diagonal lines. This allows you to push the debris through the pad. To thoroughly clean each pad, use a light brush to gently brush both sides of the pads, then pour a solution of water and vinegar on both sides. Leave the pads in this position for about 10 minutes before rinsing them with regular water to wash away any accumulated dust.
A quick tip: Replace your existing pads with new ones if the dirt doesn’t come off.
- Place the pads back into the cooler: Install the cooling pads back into their original positions and place the transmission tube part back on top. Once you are done placing the front net panel, make sure to properly position the top metal panel and screw them back together.
Also read: How to clean an air cooler?
Check Out These Crompton Air Coolers with Honeycomb Pads
Crompton air coolers with honeycomb pads are ideal options for those seeking an appliance that provides them with cool air efficiency. These air coolers are inverter compatible, provide 4-way air deflection and higher air delivery, come with a motor overload protector and an ice chamber, provide prolonged cooling and come with an Everlast pump that even works with hard water. Some of our best-selling honeycomb air coolers are the Optimus 100, Ozone 55 Ice Chamber Air Cooler, Cool Breeze DAC80 Desert Air Cooler, and Ozone 75 Home Cooling Desert Cooler. You can explore many more efficient air coolers on our website.
We hope this read helped you put an end to your confusion about wood wool vs. honeycomb material for air coolers.
1. How often should I change the honeycomb pads in the cooler?
You must replace your existing honeycomb pads in the cooler with new ones within 2-3 years depending upon climatic conditions and the hardness of the water.
2. Which cooling pad is best for an air cooler?
Considering their durability, cooling efficiency, and low maintenance cost, honeycomb pads are the best picks for an air cooler.
3. How to change the honeycomb pads in a cooler?
You must start by taking out the honeycomb pads from the air cooler. Clean the pads and their surface with a water pipe; use a light brush to brush off all the accumulated dust; pour a 50:50 solution of water and vinegar and leave it for 10 minutes; then rinse with regular water. Once done, place all components back into their original positions.